Join our Mailing List:
Home > Shop > Fantasy > Samurai >

Samurai Stone Walls Set

 Samurai Stone Walls Set

Samurai Stone Walls Set

A set of stone walls from old Japan. These walls would have surrounded residential houses of samurai and local wealthy landowners. Since the stone bases were time-consuming and costly to build, they were often used at the front of a property while lower walls were used at the sides and back of a property.


Walls can be used as lower head-height walls (approximately 38mm tall) or mounted on the stone bases to raise them another 20mm for a total height of 58mm. Straight and corner sections are included, and an alternative straight section with vertical wooden bar "windows" is also included in the set.


The gateway is approximately 90mm tall, and features detailed wooden supports under the roof and to the rear. Three versions of the door are included - a grid cut out version, a vertical slit cut-out version, and a solid wooden door. These doors actually slide (see video below), and can be removed during play if required.


Each straight section measures 120mm, and all sections include holes for 5mm x 1mm magnets.


This downloadable ZIP file contains the following STL files :

  • Straight solid wall
  • Straight "window" wall
  • Straight stone base
  • Corner wall
  • Corner base
  • Gateway section
  • Grid pattern cut-out sliding door
  • Vertical slit cut-out sliding door
  • Solid wooden sliding door

* Samurai models not included.

* Please note that the upper walls are not textured - they have been sprayed with stone-effect spray in the painted pictures above, prior to painting.


A section of ruined stone wall is available separately.


Related blog articles:

  1. Designing the walls
  2. Texturing the walls
  3. Assembling the walls
  4. Adding magnets to models
  5. Painting the walls
  6. Samurai Stone Walls available NOW!

A straight section of the samurai walls set is available for free download on Thingiverse:

This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.

  • All of the parts of this file can be printed on a 3D printer build plate of 150mm x 150mm (125mmx125mm for models released ~2023).
  • All parts have manifold (3D-printable geometry) and have been test printed.
  • Models designed for 28mm (1:64 scale) wargaming, but can be resized for other scales on your printer.
Samurai Stone Walls Set

$6.00 (USD)

Share this on...

Review Stars:

PDF Instructions >

Review this item >

Looks great!
Perfect 👍

- by MT

The set exceeded my expectations. It is high quality craftsmanship. The photo is of my initial test before starting a diorama. It does not do justice to the original. I highly recommend this for gamers and collectors alike.

- by Hadrian

Very well made

- by DLB


- by Jordy

Very happy with items, well made.

- by Bethany G

Ideal. It is perfect.

- by Antonio

Our Comment...

Thanks for the review and the pic - great colour choice!

As seen great to work with!

- by roberto


- by Buddy

Just finished printing and painting the full set. Printing time is ok, very nice details, and nice options for the sliding doors.

The gate roof is good for upgrading my Castle Wall entrance, as I added shachihokos on both sides.

The only thing I miss is having options for "T" and "+" sections of the wall to make inner sections inside the perimeter, and an option with smaller, inner gates (maybe a future set ?).

- by Luis Guarita

Our Comment...

Great pic and colour scheme - thanks!

Join our Mailing List: