Join our Mailing List:
Home > Shop > Sci-Fi > Necrontyr >

Necrontyr Pathway & Bridge Set


 Necrontyr Pathway & Bridge Set

Necrontyr Pathway & Bridge Set

A set of Necron-inspired pathways and bridge sections.

 

Most of these pathway sections are 120mm in length, and 100mm to 120mm in width. The set comprises of straight sections, T-junctions, X-junctions, plus optional clips (2 patterns) and optional columns (2 patterns). Columns and bridge supports can also be reversed as you prefer, making for quite a few construction options.

 

Also included are path sections designed to fit neatly into the Necrontyr Pyramid doorway (for both door sections and step sections), and a gently sloped 'end' section featuring the Necrontyr symbol, which will blend the pathway with the board surface.

 

All pathway sections feature slots on the underside for clips (included) to join them together, but you can also fit 5~6mm diameter rare earth magnets for extra convenience.

 

Two versions of the steps are also included. The regular step section drops the walkway bridges down from their 82mm surface height to ground level, but there is also a smaller step section designed to be used with the 50mm height Necrontyr Modular Hill Set. Please see pictures for examples.

 

This downloadable ZIP file contains the following STL files :

 

  • 120mm straight pathway
  • T-junction pathway
  • X-junction pathway
  • 100mm slope pathway
  • 40mm pyramid door pathway
  • Pathside plinths (2 types: solid / Necrontyr symbol)
  • Column plinths (2 types: solid / Necrontyr symbol)
  • Curved column with Necrontyr symbol
  • 'Seven' column
  • Bridge supports (2 types: inward facing and outward facing)
  • Bridge lateral beams
  • 75mm stairs
  • 25mm stairs
  • Joining clips

 

* For printers with small print beds, you may need to rotate the 75mm steps section up 33.3° to get it to fit, and print with supports.

 

* Necron warrior model, pyramids and hills not included.

 

Related blog articles:

  1. Designing the pathways and bridges
  2. Adding magnets to the pathways
  3. Pathway & Bridge Set available NOW!!


This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.


  • All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
  • All parts have manifold (3D-printable geometry) and have been test printed.
Necrontyr Pathway & Bridge Set

$5.00 (USD)


Share this on...

Ask a question about this item >

Review this item >
There are no reviews for this item.

Join our Mailing List: