Join our Mailing List:
Home > Shop > Sci-Fi > Necrontyr >

Necrontyr Warp Portal


 Necrontyr Warp Portal

Necrontyr Warp Portal

A Necron-inspired warp portal and dais, with a variety of 'warp' discs.

 

This piece measures approximately 240x140mm, with a height of 180mm, and the interior of the dais platform can be fitted with a small LED tealight to illuminate the 'cut-out' Necrontyr symbol in the floor.

 

There are several different options available for the 'warp' disc in the gate frame, which can be removed and swapped out as required:

 

  • Print the 120mm x 3mm flat disc (STL file included) and paint it.
  • Print the 120mm x 3mm flat disc (STL file included) and stick on one of the 6 colour images (PNG files included: green / blue / red / orange / purple / yellow).
  • Print the 120mm x 3mm flat disc (STL file included) in the clear filament of your choice.
  • Use any shop-bought 120mm x 3mm clear acrylic circle.
  • Print two copies of the 120mm x 1.5mm 'ripple' disc (STL file included) in the clear filament of your choice.
  • Print two copies of the 120mm x 1.5mm 'ripple' disc (STL file included) and paint them.
  • Leave the gate deactivated (without any disc).

 

For those who would like to light the interior in a particular colour, a 3D print file is included for clear filament lense, which can be fitted to the underside of the floor section. Alternatively, you can use any clear or coloured plastic you wish, and cut the plastic to fit the guide template.

 


This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.


  • All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
  • All parts have manifold (3D-printable geometry) and have been test printed.
Necrontyr Warp Portal

Available soon...

Share this on...

Ask a question about this item >

Review this item >
There are no reviews for this item.

Join our Mailing List: