Join our Mailing List:
Home > Shop > Sci-Fi > Necrontyr >

Necrontyr Power Generator Set


 Necrontyr Power Generator Set

Necrontyr Power Generator Set

A set of Necron-inspired power generators, with 2 types and various tops.

 

The larger type measures W 150mm x D 150mm x H 75mm, but will fit neatly on a 125mm² print bed. The separate top can be printed in solid clear filament and coloured to your choice, to allow interior lighting to glow through. Alternatively, a different top version includes a large central hole, into which you can place a 25mm (1 inch) marble in the colour of your choice. The interior of the generator can be fitted with a small LED tealight to illuminate the top, and vertical vents around the side also connect to the interior, allowing additional glow.

 

The smaller type measures W 90mm x D 90mm x H 60mm, and look great in pairs or sets of four. The separate top can be printed in clear filament and coloured to your choice, to allow interior lighting to glow through, or printed solid and painted, and there is also a second version with cut out vents. Additionally, a third top version includes a large central hole, into which you can place a 25mm (1 inch) marble in the colour of your choice. The interior of the generator can be fitted with a small LED tealight to illuminate the interior and base area. Small vents near the base will also illuminate your table with an eery glow.

 

This downloadable ZIP file contains 7 STL files :

  1. Type 1 body - BIG
  2. Type 1 top (solid)
  3. Type 1 top (marble hole)
  4. Type 2 body - SMALL
  5. Type 2 top (solid)
  6. Type 2 top (with vents)
  7. Type 2 top (marble hole)

 

* Necron warrior model not included.

 

Related blog articles:

  1. Printing the small generator
  2. Adding marbles to the generator
  3. Power Generators available NOW!!

 


This product will be delivered as a .ZIP file pack containing STL files for use on a home 3D Printer. The files are set to 28mm scale but can be rescaled before printing.


  • All of the parts of this file can be printed on a 3D printer build plate of 125mm x 125mm.
  • All parts have manifold (3D-printable geometry) and have been test printed.
  • Models designed for 28mm (1:58 scale) wargaming, but can be resized for other scales on your printer.
Necrontyr Power Generator Set

$5.00 (USD)


Share this on...



Review this item >

Great scatter terrain for any Sci fi wargames. Would buy again.

- by tbearogre


Join our Mailing List: